Menu
Keep Your Refrigeration Equipment At Optimum Performance With Scheduled Analysis, Adjustments, Lubrication, and Cleaning
Automatic, periodic inspection, lubricating, adjustment, and cleaning of your refrigeration systems keeps it running at peak efficiency.
A competent, trained, dependable staff of experts to maintain your equipment and its performance.
Our skilled experts know their business. You can rely on our service team and our reputation to give you fast, dependable, and fair service.
A regularly scheduled preventative maintenance program will reduce break-downs and will identify minor problems and mitigate or prevent potential major, expensive problems
Contactors and Relays which are not operating properly can cause motor burn. We always check the compressor amp draw against the FLA of the compressor.
Contactors and Relays which are not operating properly can cause motor burn. We always check the compressor amp draw against the FLA of the compressor.
you cannot properly charge a system or expect operational efficiency with a dirty condenser and/or evaporator coil.
Annually, and sometimes semi-annually depending on equipment duty, new belts should be installed. The pulley and belt tension should be adjusted at each belt change.
Annually, and sometimes semi-annually depending on equipment duty, new belts should be installed. The pulley and belt tension should be adjusted at each belt change.
This is the worst thing that can happen to a system. System icing will damage the compressor. Low refrigerant charge (and identifying and repairing the leak) should be addressed immediately to mitigate compressor damage.
Poorly adjusted valves will cause liquid flood back thinning the oil and damaging the compressor.
Poorly adjusted valves will cause liquid flood back thinning the oil and damaging the compressor.
A pump down solenoid system or adding a suction line accumulator is the best defense to preventing these conditions.
Preventing LF is as simple as cleaning the evaporator, filter and checking the Super Heat. Compressors are meant to pump vapor. Any liquid that reaches the cylinders of the compressor is a potential cause for damage.
Preventing LF is as simple as cleaning the evaporator, filter and checking the Super Heat. Compressors are meant to pump vapor. Any liquid that reaches the cylinders of the compressor is a potential cause for damage.
Making sure that your low pressure switch doesn’t let your system run into a vacuum.
Oil is in the compressor and it must be compatible with the refrigerant. With over 100 refrigerants and basically 3 different oils, it is very likely a mismatch of the oil and refrigerant.
Oil is in the compressor and it must be compatible with the refrigerant. With over 100 refrigerants and basically 3 different oils, it is very likely a mismatch of the oil and refrigerant.
